DILO Home > Analyzers > Multi-Function Analyzer > 3-036-R001
SF6 Multi-Function Analyzer 3-036-R001
Description
The 3-036-R001 has been designed to allow users to determine
every aspect of SF6 gas quality. Rather than having a separate analyzer to
determine moisture content, decomposition values, and over all gas purity, the
3-036 performs all three tests with one device. All measurements are performed
at atmospheric pressure – eliminating common errors due to varying breaker
operating pressures. With only two buttons, and a single purging valve, the
device is extremely easy to use.
The 3-036 is pre-programmed with the internationally recognized
CIGRE SF6 standards, and should any variable fall outside of acceptable limits, both a
visual and audible alarm will be triggered. The alarm set points can be manually
increased/decreased by the end-user to meet company guidelines for acceptable
limits.
The analyzer is equipped with an internal data logger, and saves
the readings as they occur. These values can be downloaded (or used in
real-time) to a PC via the integrated serial port (RS232) output.
Technical Specifications
- Decomp Range: 0-5000 PPMv
- Decomp Accuracy: 100 PPMv
- Moisture Range: 41 PPMv – 10k PPMv
- Moisture Accuracy: ± 2°C
- Purity Range: 0-100%
- Purity Accuracy: ± 1% (S6/N2)
- Input Pressure: 7 to 200 psig
- Flow Rate: max. 1.6 f3/min
- Measuring Time: about 5 minutes
- Operating Temp: -4°F to 104°
- Operating Voltage: 90-265VAC, 60Hz, 40W
- Interface: RS 232
- 20"L x 19.5"W x 7.5"H, 44 lbs.
Features
- Simple operation – 1 valve, two buttons
- Clearly visible alarms when exceeding limits
- Data logging – save under any filename
- Software – includes CD for PC interface
- 6.5’ and 13’ hoses with DN8 and DN20 fittings
- Self-sealing couplings on hoses and fittings
- Transport case to protect device
- 6.5’ long power cable
- Serial data cable
- Built in handle for easy lifting
- Discharge fitting to connect to optional recovery system